The voLANte SoftTx software product works with voLANte video-over-IP distribution equipment and emulates the functionality of a hardware encoder but at reduced frame-rate. Whereas voLANte hardware encoders output HD video at 60-Hz, SoftTx is processor-dependent and typically outputs video at 1-Hz update rates. This rate is sufficient for PowerPoint slides, flight information, advertisements, or anything that changes at rates of once per second or less. The software application runs entirely on the host computer and outputs video through the host network interface at any supported voLANte resolution up to 1080p for HDTV or 1600×1200 for computer graphics. The video source can be the active or extended desktop, or a designated image file on disk. Any SVSi controller (such as Conductor Server or Conductor DiVAS) or third-party controller will discover the SoftTx and route it to the desired displays just as it would a hardware encoders.
Resources
Setup and Installation | Troubleshooting | Software and Utilities | User Guides | Literature | Graphics
Setup and Installation
Quick Start Guide
SVSi encoders support both JPEG2000-compressed and uncompressed video. Video compression is turned on by default with a default bit-rate of 25-Mbps. The bandwidth per compressed video stream is adjustable between 1-100Mbps.
More…
ATR201 Quick Start Guide
Quick Start Guide for the ATR201 Audio Transceiver.
More…
VDC208 Quick Start Guide
Quick Start Guide for the Conductor VDC208.
More…
Network Setup and Design
This guide is designed as a way to introduce the basics of network setup and design and to serve as a refresher for some users who may want to reference it in their design of SVSi or other network based systems.
More…
DiVAS Help Contents
This guide is intended as an overview on the proper use of SVSi DiVAS management software.
More…
Conductor Server Installation
There are two activation codes for Conductor Server. The first activation allows it to be used for a set period of time (usually a month). The second permamently locks Conductor Server to your SVSi hardware allowing it to be used forever. With the second, as long as Conductor Server can “see” your SVSi hardware, it will continue to operate.
More…
Conductor Server Activation
This is a step-by-step guide installing Conductor Server. After completing, you will be directed to apply an upgrade patch and/or activate for no-dongle licensing.
More…
Conductor Server Firmware Update
This is a step-by-step guide installing Conductor Server. After completing, you will be directed to apply an upgrade patch and/or activate for no-dongle licensing.
More…
Manually Add Channels to SVSi Viewer
To manually add channels to SVSi Viewer:
More…
 | Installing Your VRT107Please follow these guidelines when installing your VRT107 Multi-Transmitter to eliminate common installation problems and avoid any network issues.
Download |
|
Troubleshooting
Cannot Communicate with SVSi Unit
The most common reason Transmitters or Receivers lose communication is network issues. Follow these steps to diagnose and repair.
More…
Dongle Troubleshooting
For keylock dongle issues the first step is to remove the dongle from the computer and then run:
More…
SVSi Viewer Network Dongle Tips
A couple tips about the SVSi Viewer network dongle.
More…
Conductor Server Firmware Update
This is a step-by-step guide installing Conductor Server. After completing, you will be directed to apply an upgrade patch and/or activate for no-dongle licensing.
More…
Manually Add Channels to SVSi Viewer
To manually add channels to SVSi Viewer:
More…
Software and Utilities
 |
 |
 | Conductor Mobile iOSConductor Mobile Application for iOS.  |
|
 | Crestron Module Master FileMaster file containing Conductor Module for communication with VDC108 and 208, as well as direct control modules for ATR201, VWP120, and all decoders.
Download |
|
WireShark
WireShark is a packet sniffing tool, it can be used to track traffic across your network. You can add an IP filter in to track packets going to/from a specific IP address. More details can be found on WireSharks website.
User Guides
 |
 |
 |
 | SVSi Control Solutions ProtocolDocument detailing SVSi product control protocol and commands.
Download |
Literature
 |
 | Product Reference GuideQuick reference guide showing specification and configuration information for SVSi products.
Download |
 |
 |
|
 |
 |
 |
 |
 |
 | SVSi Collaborative Video Conferencing System Flyer8.5 x 11 Collaborative Video Conferencing System flyer.
Download |
 |
 |
Graphics
| Visio Shapes for Layout DesignVisio Shapes for layout design, includes VMT-105, VMT-107, VRR-104, VRR-204, and VRR-304 shapes.
Download |
| AutoCad Files for voLANteAutoCad files for voLANte functional diagrams. Includes front and rear images and connections.
Download |